EVA Composite Sponge Can Be Used in Ceramic Waxing Car Waxing Cleaning Sponge

Whether it is hand or mechanical waxing, to ensure that the paint is evenly coated. When waxing by hand, apply an appropriate amount of car wax on the sponge (special waxing sponge), and then reciprocate in a certain order to apply a straight line, each smear should have 1/5-1/4 of the coincidence with the smearing area on the road, prevent leakage and ensure uniform application. Mechanical waxing when the car is waxed on the waxing machine sponge, the specific smear process and hand-similar, it is worth noting that the edge, corner, and edge of the smear should be avoided over the paint, and in this respect, manual smearing is easier to grasp. Polishing. According to the instructions of different car wax, after general smearing 5-10 minutes can be polished. When polishing, we follow the principle of waxing to ensure that the polished meter is not contaminated, polishing is usually used non-woven cloth wool are reciprocating linear movement, and appropriate pressure to remove the remaining wax.

Here are a few things to keep in mind when you're on Your Own: 1. The Waxing operation environment is clean, there is good ventilation, and conditions can be set up in a special waxing workshop. 2. The should be in a cool place to the car waxing, otherwise the temperature of the meter, and the car wax adhesion will fall, affecting the waxing effect. 3. When waxing, hand-made sponge and waxing machine sponge running line should be straight reciprocating, not ring daub, to prevent uneven coating caused by a strong ring diffuse. Four. When waxing should follow the principle of up and then down, that is, daub the roof, front and rear cover, body side and so on. 5. When waxing, if the sponge appears with the same color paint, the paint may have been damaged, should immediately stop waxing, repair treatment. 6. Polishing work to be waxed after the completion of the specified time, and polishing movement is also linear reciprocating. Unpolished vehicles are not allowed to drive on the road, otherwise re-polished, easily cause lacquer scratches. Seven. After polishing, carefully check, and remove the license plate, lights, doors, and other residual car wax, to prevent corrosion. 8. After waxing, the equipment and supplies should be cleaned and stored properly. 9. To master the frequency of waxing, due to different driving and parking environments, waxing interval time can not be scheduled, but you can wipe the body paint by hand, if there is no sense of smoothness, it should be waxed again.